S-II-O-0541 spur gear slewing drives mounted horizontally on industrial automation turntables
Publish time：2022/03/22 Latest Products Views：166
Type: Spur gear slewing drive
Slewing drive gear ratio: 7.00
Rated output torque: 10.6KN.M
Rotation center diameter: 541mm
Total height with adapter flange: 123mm
Gear backlash ≤0.4mm
S-II-O-0541 spur gear slewing drive is used on industrial automation turntables and are used for horizontal installation. The II series slewing drives adopt the teeth of module 6, their slewing bearing thickness are thicker than the I series, so the anti-overturning and stability of the slewing drives are greatly improved. The single tooth loading of module 6 teeth is larger than that of module 4 teeth, so the output torque of the II series is larger and the impact resistance is better.
In the tooth quenching process, the module 4 is overall quenching, while the module 6 is single-tooth quenching. The deformation caused by single-tooth quenching is much smaller than overall quenching, so for the ordinary precision slewing drive without grinding teeth, the rotary precision of module 6 is higher.
During the selection process, please inform the engineers of U-TRSM as much as possible about the working conditions. After we summarize and analyze your working conditions, we will give our suggestions. The detailed working conditions will help us to provide you with better reasonable plan. In the process of design, calculation, and selection, everyone should communicate more and exchange opinions and ideas with each other. Through discussions, we can always obtain better solutions. Everyone learns from each other and grows in this process.